New NRG Tech Shirt!

Along with bring back some old favorites, we've added a new NRG Tech T-shirt to the mix for the 2010 season.

The NRG Tech 2010 Sponsor t-shirt gives a big, fat shout-out to our generous sponsors this year. These are the companies that are supporting the sport! A big thanks goes out to all of our sponsors this year!

We've tweaked the standard NRG Tech logo on the front and all of our sponsor logos are displayed on the back of the shirt. On the left sleeve is the Chris Miller Racing logo and we wouldn't be NRG Tech without giving a little attitude on the right sleeve!

To find out more info on the shirts and to order yourself one, click here:
http://www.nrgtechparts.com/nrg_tech/nrg_tech_sponsor_logo_tshirt/g-61151.aspx

NRG Tech & NYCE1s Present Power Up Dyno Event

We are thrilled to announce that NRG Tech will be hosting NYCE1s Power Up Dyno Event and Car Show on April 3, 2010.

Whether you are entering the contest or just looking for some "fun runs", this http://www.blogger.com/img/blank.gifis an event not to be missed! Big thanks go out to MB Racing for their support and sponsorship in this event.

Power Up Dyno Series Event Classes!!

B-Series All Motor Class
Win Up To $300 in Cash and prizes!!

K-series All Motor Class
Win up to $500.00 in cash and prizes!!

T3 Turbo Street Class
Win Up to $500.00 in cash and prizes!!!


T4 Turbo Kings Class
Win up to $1,000.00 in Cash and Prizes!!!

Date: Sarturday April 3rd, 2010!!!

Event Starts: 10 A.M.

ADDRESS:

NRGTech Racing
99A Bell Street
West Babylon, NY 11704 USA

For More Information:
P: 718-310-9609
E: nyce1s@gmail.com

Video Press Release 2010

We are so excited to be coming into the 2010 season with some fantastic sponsors, both old and new, behind us. NYCE1s recently interviewed Chris to find out all the details for the upcoming season.

Check out the video below to learn more about our wonderful sponsors and the great products that they carry and we use!

Horsepower, Found

The blog has been quiet for a bit, but that doesn't mean we've been cooling our heels over here at the shop. In preparing for the 2010 season that is fast approaching, Chris took some time out to do some testing and diagnostics on his car.

First up, Chris wanted to see how his car sat at the end of last season. The car did better than any of us could have imagined it would and we were pretty sure there would be a price to pay for it. We never really got to dyno the car with the boost turned up at all, so Chris gave it shot. The results were initially mixed, but after two sets of 26" x 10" Mickey Thompson slicks and a few hours later we had some concrete answers.


At just over 35lbs. of boost the car made a little over 1000hp to the tires. At 46lbs. it made an astonishing amount of power by cracking the 1200hp mark at an SAE Correction factor. Actual power uncorrected was over 1250hp, but we'll stick with SAE Correction for our forum geeks out there ;)


After our dyno adventures, Chris moved onto testing a few new products he hopes will give him even more power than he already has. Hopefully, 2010 will shape up to be just as exciting, if not more, than 2009.

Keep checking back here for more testing results!

Driveshaft Shop Axles - A Lesson in Quality

Reliability is one of the key ingredients in the making of a fast racecar. Anyone can step up to the line and run a fast ET, all the while blowing your motor, breaking an axle and demolishing your turbo. Then it's back to the drawing board; a new build with new parts and more money because quality parts and service weren't utilized the first time.

We've seem this scenario play out too many times to count. It's because of this that we stress to our customers the importance of quality parts. Driveshaft Shop Axles are one of these "quality parts" we often recommend to our customers.

Driveshaft Shop axles are a great fit for anyone looking for a reliable aftermarket axle, no matter if it's for your daily driver or drag car.

Recently OBX tried to duplicate DSS's 5.9 axle. In an effort to show the quality of their product vs the duplicate, DSS tested the OBX axle against their original style and the new tapered one(current) for break testing. Here are the results:

OBX - 3300 ft*lbs - 55 degrees twist (this is what a 2.9 axle breaks at, a 3.9 is about 3700)

V3 - 4850 ft*lbs - 80 degrees twist (this is the original DSS style)

V4 - 5400 ft*lbs - 250 degrees twist (this is the new style with tapered bar)

Check out how much twist was allowed before breakage on the V4. This is very encouraging on the spline problem with stock splines!

We spoke with the Driveshaft Shop regarding their product line and they had this to say, "Here at the Drive Shaft Shop we will continue to not only make new items but experiment and make existing ones better. We wish you all great success in the new year."

Want to know more about Driveshaft Shop axles and other products? Drop us a line. We are always eager to tell you about products we believe in!

EFI Wizard Injectors!

When a great new product comes out, we just have to share it with our customers!

EFI Wizard Injectors are the latest in fuel injector technology.

All sets will be supplied with flow data sheets and all sets are packaged together to be flow matched sets within .5% to 1.5%.

We use only the best parts and craftsmanship when producing our injectors. We guarantee your satisfaction.

Some of the benefits of these fuel injectors are...

Excellent low pulse width response along with predictable response all the way down to 1.5ms.

They have an excellent wide spray pattern which translates into great fuel atomization.

These injectors have been tried and tested to operate at fuel pressures in excess of 10bar. On our larger fuel injectors such as the 2000's that translates into over 4000cc/min.

These injectors are compatible with the additive MTBE (methyl tertiary-butyl ether), otherwise found in fuels such as VP's q16 and VP's Import blend.

High Impedance means no more resistor boxes or external injector drivers.

All sets will be shipped with the conversion hats as needed to fit the fuel system you are using them in (14mm or 12mm). Also pins and clips will be supplied with each order.

We use the testing agent Heptane to flow our injectors, that is the industry standard and all we use.

Call for pricing! Pictures coming soon!!

NYCE1s Presents 2009 Outlaw Shootout Coverage

Nyce1s.com never disappoints with their footage from the events. So it comes as no surprise that the 2009 Outlaw Shootout Coverage is nothing less than amazing coverage. Julian, Craig and their entire team went above and beyond to really showcase the racers and all that was put into this event. This event was, by far, the best event of the 2009 season and these two videos show exactly why!

Enjoy! And don't forget to check out our youtube page for many more racing videos! http://www.youtube.com/user/NRGtechracing